Flashings and Handwork
The need for flashings is determined by the complexity of shapes of each particular roof. There is though a number of unavoidable flashings (ridge capping, verge trim, joint flashing), which are indispensable when mounting the roof. The range of colours available for flashings is the same as for corrugated flashings / sheeting and these can be ordered of the same colour as the roof!
Straight ridge capping
Suitable for use: all types of roof ridge
Length: 2000mm
Cross-section: 150x150mm
Convex ridge capping
Suitabe for use: all types of roof ridge
Length: 2100mm (effective 2000mm)
Cross-section: width 330mm, height 85mm
Straight end of convex ridge capping *
Suitable for use: horizontal ridge end piece
* Colour choice: RR11, RR23, RR29, RR32, RR33, RR37, RR750
Gable end of convex ridge capping *
Suitable for use: sloping ridge end piece (for hipped ridge)
* Colour choice: RR11, RR23, RR29, RR32, RR33, RR37, RR750
Y-piece*
Used in hipped roofs for jointing pitched and horizontal ridge cappings
* Colour range: RR11, RR23, RR29, RR32, RR33, RR37, RR750
T-piece*
Used for T-form jointing of horizontal ridge cappings.
* Colour range: RR11, RR23, RR29, RR32, RR33, RR37, RR750
End-piece
Suitable for use: gable cladding
Length: 2000mm
Cross-section: ca 100×100 mm
Valley flashing
Suitable for use: valley, under the corrugated sheet
Length: 2000mm
Cross-section: 300x300mm
Valley cover flashing
Suitable for use: valley, above the corrugated sheet
Length: 2000mm
Joint flashing
Suitable for use: joints between the roof and walls (e.g. for jointing the winch box walls and roof surface, for jointing stack’s encirclement with the roof)
Length: by order
Cross-section: by order
Handwork windowsill flashing, parapet flashings, trapdoors, socle flashings, eaves flashings, caps, etc.
Cross-section: on the basis of the client’s drawing and desire
Max. length: 3000mm
